lv快盈app官网

lv快盈app官网
benner

袋式除尘技术和应用的十大黄金法则（转载）

lv快盈app官网发布日期：2018-01-02 15:07

   今天闲来上网，偶见一博友发布的这篇文章，虽简短，但很有见地，所以将此干货呈现于此，让更多搞袋式除尘器设计的同僚更上一层楼
        
1.Design your system to accommodate the full range of operating conditions 
  袋式除尘器的设计必须满足系统满负荷的运行条件

2.Design your system to evenly distribute the gas and dust to all areas of the baghouse and never store dust for long     periods in the hoppers. 

  设计时必须充考虑到含尘烟气是否能够均匀地进入袋式除尘器内的各部分；决不能将除尘器灰斗用于储灰
 
3.Incorporate fabric that is compatible with the full range of inlet conditions and outlet requirements 
  整台袋式除尘器不但要能适应进入除尘器的烟气条件，而且要使出口烟气达到环保排放标准

4.Make sure the system is compatible with your plant’s O&M procedures and requirements

  要保证除尘器系统的运行能满足您工厂实际运行和维护的规程及要求

5.Inspect all system components thoroughly before installation and again prior to initial start-up for compliance to specifications and for correct assembly 
  安装或设备启动前，必须彻底检查所有的除尘器组件是否已满足说明书要求并正确安装

6.Develop start-up and shutdown procedures to protect your bag site and abide by them 

  建立正确的除尘器启动和停机程序，以防止滤袋的不必要损坏

lv快盈app官网 7.Establish and maintain the required bag cleaning energy and frequency to stabilize system pressure-drop without over cleaning 

  确立并维持滤袋清灰所要求的能量和频率，在设备清灰不过分的情况下实现系统压降的稳定

lv快盈app官网 8.Monitor and maintain historical records of key system parameters on a regular basis to assess system stability 

  定期监测和评估系统的稳定性，并将系统运行的主要参数保留存档

9.Identify and solve problems early, before they snowball 

  尽可能早地发现和解决问题，千万不要延误解决问题的时机

lv快盈app官网 10.When in doubt---go to a lower G/C ratio 

   在怀疑或没有把握的情况下，选择较低的气布比（过滤速度）不会错！
下一篇：陶瓷厂两台喷雾干燥塔布袋除尘器试车投产 上一篇：除尘骨架是怎么做出来的？